After-sales Service: | Support |
---|---|
Warranty: | Support |
Type: | Seamless |
Technique: | Hot Rolled |
Material: | Carbon Steel |
Surface Treatment: | Black |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
R-Thread Anchor Rod Technial Data |
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Outside diameter (mm) |
25 | 32 | 32 | 38 | 51 | 51 | 76 | 76 |
Internal diameter (mm) |
14 | 19 | 16 | 19 | 36 | 33 | 52 | 45 |
Ultimate load capacity (KN) |
200 | 280 | 360 | 500 | 550 | 800 | 1600 | 1900 |
Yield load capacity (KN) |
150 | 230 | 280 | 400 | 450 | 630 | 1200 | 1500 |
Tensile strength, Rp0.2 (N/mm2) |
800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 |
Yield strength, Rp0.2 (N/mm2) |
650 | 650 | 650 | 650 | 650 | 650 | 650 | 650 |
Weight (Kg/m) | 2.3 | 3.2 | 3.6 | 5.5 | 6.5 | 8.0 | 16.0 | 19.7 |
Thread type (left-hand) |
ISO 10208 | ISO 1720 | MAI T76 Standard |
T-Thread Anchor Rod Technial Data |
Bar Type | Outside Diameter (mm) |
Inside Diameter (mm) |
Cross section (mm2) |
Ultimate Load KN |
Yield Point KN |
Weight (kg/m) |
Thread Left/ Right Hand |
30/11 | 30 | 11 | 446 | 320 | 260 | 3.3 | Lift or right |
30/14 | 30 | 14 | 395 | 260 | 220 | 2.9 | Lift or right |
30/16 | 30 | 16 | 382 | 220 | 180 | 2.7 | Lift or right |
40/16 | 40 | 16 | 879 | 660 | 525 | 7.0 | Lift or right |
40/20 | 40 | 20 | 726 | 539 | 430 | 5.6 | Lift or right |
52/26 | 52 | 26 | 1337 | 929 | 730 | 10.0 | Lift or right |
73/53 | 73 | 53 | 1160 | 1630 | 970 | 12.3 | Lift or right |
73/56 | 73 | 56 | 1094 | 1414 | 785 | 11.1 | Lift or right |
73/45 | 73 | 45 | 2265 | 1630 | 1180 | 17.8 | Lift or right |
Anchor Plate |
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Dimention (mm) | 150*150 | 200*200 | 200*200 | 200*200 | 200*200 | 250*250 | 250*250 | 250*250 |
Thickness (mm) | 8 | 10 | 12 | 12 | 20 | 40 | 40 | 40 |
Hole diameter (mm) | 30 | 35 | 35 | 41 | 60 | 60 | 80 | 80 |
Weight (KG/PC) | 1.4 | 3 | 3.7 | 3.6 | 8.8 | 18.5 | 18 | 18 |
Cold deformed with geometry |
Anchor Coupling |
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Outside diameter (mm) | 35 | 42 | 42 | 52 | 63 | 63 | 95 | 95 |
Length (mm) | 120 | 145 | 160or190 | 180 | 180 | 200 | 200 | 200 |
Weight | 0.45 | 0.7 | 0.75 | 1.4 | 1.7 | 1.9 | 6.4 | 6.4 |
Machined steel coupling middle stop |
Drill Bit |
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Diameter (mm) | 41,51 | 51,76,90 | 90,100,110,115,130 | 130,150,160,180,200 | ||||
Hardened cross bit (EX) |
Hardened cross bit for loose to medium dense condition with small boulders. | |||||||
Tungsten cross bit (EXX) |
TC cross bit for soft to medium rock for mations | |||||||
Hardened button bit (ES) |
Hardened buuton bit for unconsolidated rock with boulders. | |||||||
Tungsten carbon button bit (ESS) |
Button bit with TC inserts for medium rock for formations. | |||||||
Hardened arch bit (EC) |
Hardened drill bit with optimized geometry for uncon solid dated soil with small boulders. |
|||||||
Tungsten carbon arch bit (ECC) |
TC drill bit with optimized geometry for soft to medium rock formations. | |||||||
Hardened drop center bit (EY) |
Hardened cross bit for loose to medium dense ground conditions | |||||||
TC drop center bit (EY) |
TC drill bit for soft to medium rock formations. | |||||||
Casting clay bit (EW) |
Casting clay bit with optimized geometry for very soft to soft caly. | |||||||
Machined steel bit or Casring steel bit |
Anchor Nut |
R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
Key size (mm) | 41 | 46 | 46 | 50 | 75 | 75 | 100 | 100 |
Length (mm) | 135 | 45 | 45 | 55 | 70 | 70 | 80 | 80 |
Weight (kg/pc) | 0.25 | 0.35 | 0.35 | 0.5 | 1.55 | 1.55 | 3.6 | 3.6 |
Machined steel nut or casting steel nut |
During the constructions of underground works, it is very common to encounter soft rock, fractured zone and large deformation due to high ground stress. In the case of serious collapsing, extra-long anchor is needed instead of ordinary one.
Technology Process
The Self Drilling Anchor system is comprised of a hollow threaded anchor bar with a sacrificial drill bit that performs drilling,anchoring and grouting in a single operation. Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micro piles etc projects.
1. Connect the alloy drill and anchor rod one end, on the other end, connect the drill sleeve and shank adapter, then connect the drilling rig or hand-held drill. Then start drilling, fill the cooling water while drilling.( If you want to lengthen the anchor rod, can connect the coupling, and then drilling)
2. Take down the drill, put the stop-grouting plug into the rod, and insert it to the hole, then ready to grout. Special circumstances like surrounding rock grouting tension is over or surrounding rock is too broken, can use anchor agent to seal the hole.
3. Connect quick grouting coupling and anchor rod end, connect other end of grouting machine.
4. Start grouting, when grouting full and reach design value then power off. Grouting pressure according to the design parameters and grouting machine performance determine, Cement/sand reference values is 1:0 ~ 1:1, water/cement reference value is 0.45:1 ~ 0.5:1.
5. Install anchor plate and nuts, and tighten nuts.
The packaging is packaged in tarpaulins and wooden boxes to ensure that it will not rust and corrode in the process of encountering water.
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Tianjin, Qingdao ports, you can choose other ports according to your needs.Suppliers with verified business licenses