28 Inch Large Diameter Carbon Steel Pipe SA192 Boiler Seamless Steel Tube Pipe

• After-sales Service: Support
• Warranty: Support
• Type: Seamless
• Technique: Cold Drawn
• Material: Alloy Steel
• Surface Treatment: Black
• Model NO.: SA192
• Usage: Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Machinery Industry, Construction & Decoration, Special Purpose
• Section Shape: Round
• Application: Fluid Pipe, Boiler Pipe, Heat Exchanger Tubes
• Length: 5.8m, 6.4m, 6m, 11.8m, 12m, or as Required
• Thickness: 1-120 mm
• Delivery Time: 8-14 Days
• Processing Service: Bending, Welding, Decoiling, Punching, Cutting
• Transport Package: Standard Seaworthy Packing
• Trademark: YF STEEL
• Origin: Tianjin, China
• Production Capacity: 10000 Tons Per Month

Product Description

Product Introduction

The cold working methods of steel pipes mainly include cold drawing and cold rolling. The raw materials of cold-rolled steel pipes can be hot-rolled seamless steel pipes or welded pipes. The common characteristics of the cold working method of steel pipes are high dimensional accuracy and good surface roughness. It can produce very thin (up to 0.05~0.01mm) thin-walled tubes and very thin (up to 0.3~0.1 mm in diameter) capillaries.
Seamless steel pipe is a kind of pipe with hollow section, which is widely used to transport fluids, such as oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, steel pipe is light in weight when its bending and torsional strength is the same. It is a kind of economic section steel, which is widely used in pipeline engineering.
Generally, the production process of seamless steel pipe can be divided into cold rolling and hot rolling. The appearance of cold-rolled seamless steel pipe is shorter than that of hot-rolled seamless steel pipe. The wall thickness of cold-rolled seamless steel pipe is generally smaller than that of hot-rolled seamless steel pipe. But the surface looks brighter than that of thick wall seamless steel pipe. The surface is not too rough, and the diameter is not too much burr.
In order to obtain seamless pipes with smaller size and better quality, cold rolling, cold drawing or a combination of the two methods must be used.
High precision cold drawn precision steel pipe is a new type of steel pipe, which is mainly characterized by high precision. There are usually two production processes of two high mill and three high mill. The precision of three high mill in producing cold rolled seamless steel pipe is higher, which can be controlled within a few wires, but the price is relatively higher.
The product specification range of cold rolled steel pipe is: outer diameter 4.0 ~ 450mm; The wall thickness is 0.04 ~ 60mm. Compared with the cold drawing method, the advantage of the periodic cold rolling method is that the shrinkage of the pass surface is large, there is no need for difficult head, and the yield is high.
 

Product Specification

Standard	ASME SA192/SA179, ASTM A106, ASTM A53, ASTM A210, ASTM A519, API 5L Gr.B, DIN17175, DIN1629, DIN2391, DIN17440, DIN2448, EN10216-1 10216-2 10305-1, JISG3452-54, GB/T8162, GB/T8163, GB/T3639, DIN2391-2 and so on
Grade	20Cr, 40Cr, ST35, ST37.4(10#), ST45(20#), ST52(16Mn), ST55(35#), 45#(ASTM 1045, DIN45), Q345B, E215, E235, E355, sch10, sch20, A106, A179, A192, A210, T11, T22, T12, AISI 4130, SAE1010, SAE1020.etc
Size	Outer Diameter: 21.3mm-660mm, According to customer requirements Wall Thickness: 0.5mm-20mm, According to customer requirements Length: 1-12m, According to customer requirements
Section Shape	Round
Technology	Cold Drawn
Tolerance	Control with in the standard, OD: +/-1%, WT: +/-5%
Surface Treatment	Black Painted, Galvanized, Natural, Anticorrosive 3PE coated, polyurethane foam Insulation
Main Features	1.Environmental protection: can effectively reduce environmental pollution. 2.Corrosion resistance: Strong anti-fouling, acid, corrosion, wear resistance, non-radioactive. 3.Surface cleanliness: The product surface is smooth and compact, not easy to be polluted by dust, and has good self-cleanliness. 4.Easy Maintenance: A slight loss is easy to repair, etc
Processing Service	Welding, Punching, Cutting, Bending, Decoiling
Payment Terms	T/T, D/A, D/P, L/C, Western Union, MoneyGram, According to customer requirements
Delivery Time	Within 7 days, According to the quantity ordered by the customer.
Packing	Standard Seaworthy Package, according to customer requirements
Samples	Available
Usage /Application	1.Oil pipe line, Drill pipe, Hydraulic pipe, Gas pipe, Fluid pipe, 2.Boiler pipe, Conduit pipe, Scaffolding pipe pharmaceutical and ship building etc.

SA179/SA192 CHEMICAL AND MECHANICAL COMPONENT:

ASTM A179/(ASME SA179)
Seamless Cold Drawn Low Carbon Steel Heat Exchanger And Conderser Tubes
Application:	For tubular heat exchangers,condensers,and similar heat transfer apparatus.
Size(mm):	O.D.: 6.0~114.0mm W.T.: 1~15mm L: max 18000mm

Grade and Chemical Composition (%)

Chemical Composition	C	Mn	P≤	S≤	Si≤
	0.06-0.18	0.27-0.63	0.035	0.035	0.25

Tolerance(SA-450/SA-450M):

OD In (mm)	+	-	WT In(mm)	+	-
<1(25.4)	0.10	0.10	≤1.1/2(38.1)	20%	0
1~1.1/2(25.4~38.1)	0.15	0.15	>1.1/2(38.1)	22%	0
>1.1/2~<2(38.1~50.8)	0.20	0.20
2~<2.1/2(50.8~63.5)	0.25	0.25
2.1/2~<3(63.5~76.2)	0.30	0.30
3~4(76.2~101.6)	0.38	0.38
>4~7.1/2(101.6~190.5)	0.38	0.64
>7.1/2~9(190.5~228.6)	0.38	1.14

ASTM A192/A192M-02
Seamless Carbon Steel Boiler Tubes for High-Pressure
Application:	For seamless carbon steel boiler and super heater tubes for high-pressure service
Size(mm):	O.D.: 6.0~114.0mm W.T.: 1~15mm L: max 18000mm

Grade and Chemical Composition (%)

Chemical Composition	Mn	P≤	S≤	Si≤
	0.27-0.63	0.035	0.035	0.25

Tolerance(SA-450/SA-450M):

OD In (mm)	+	-	WT In(mm)	+	-
<1(25.4)	0.10	0.10	≤1.1/2(38.1)	20%	0
1~1.1/2(25.4~38.1)	0.15	0.15	>1.1/2(38.1)	22%	0
>1.1/2~<2(38.1~50.8)	0.20	0.20
2~<2.1/2(50.8~63.5)	0.25	0.25
2.1/2~<3(63.5~76.2)	0.30	0.30
3~4(76.2~101.6)	0.38	0.38
>4~7.1/2(101.6~190.5)	0.38	0.64
>7.1/2~9(190.5~228.6)	0.38	1.14

 

Product Display

We can produce different sizes, thicknesses, widths and materials according to your requirements

Product Test
We will control the quality from part of material steel pipe, each pipe produced will be have it is own identify label, quality will check the chemical component and physical property and then provide material test certificate. Size dimension will be checked and show pictures to customer to guarantee all goods will be meet requirement.

Packaging and Shipping

1) Packaging: 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve or as customers' requirements.
2) Shipping: We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.
3) Trade terms: FOB/CIF/CFR
4) Shipping port: Qingdao/Tianjin/Shanghai
5) Shipment: A: Length: ≤6m, loaded in 20GP Container. B: Length: ≤12m, loaded in 40GP Container.
Remark: Size of 20GP Container (inside :5898*2352*2393mm); Size of 40GP Container (inside:12032*2352*2393mm); Size of 40HQ Container (inside:12032*2352*2698mm).
6) Delivery time: Normal size: 7-15days send from warehouse directly. Special size:15-30days custom made for you.

FAQ

Q1:Can you send samples?
A:Of course, we can provide customers with free samples and express shipping service to all over of the world.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q5:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q6:What is your terms of payment ?
A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.
Q7:Do you provide custom made Products service?
A: Yes,if you have your own design , we can produce according to your specification and drawing.
Q8:What are the certifications for your products?
A:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.
Q9:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
Q10: How many countries you already exported to?
A:We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
Q11:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q12:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed and customers can appoint third parties to inspect the products before loading too.
Q13:How to pack the products?
A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during ocean transportation.
Q14:What is your working time?
A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry in the coming working day.